Our capabilities
The production complex operates three eight-section Emhart glass-forming machines, with a capacity of up to 500,000 bottles per day, calculated in 500 ml equivalent. The process covers forming, surface treatment, annealing, inspection and packing.
Equipment
Glass cooking takes place in a heat engineering unit, namely in the bathroom of a continuous glass furnace, flowing, regenerative, rectangular with a separate outflow channel, with a horseshoe-shaped flame direction. The area of the cooking part of the glass furnace is 90 m2. The temperature in the fining bay is (1,540-1,600) °C, the temperature in the working zone is (1,120-1,240) °C. The glass mass level in the cooking part is up to the limit (1,110 ± 0.5) mm, (1,510 ± 0.5) mm beyond the limit in the deepfiner. The productivity of the glass furnace is up to 215 t/day when cooking colorless glass of BT brand.
The glass furnace is a technological equipment and is located inside the main production building. From the working tank, the glass mass is sent to the feeder channels (3 pcs.), where the final preparation of the glass mass for production (conditioning of the glass mass) takes place. The temperature of all zones of the feeder channel is adjusted automatically. There is a gradual decrease in temperature from the outflow channel to the bowl. The temperature of the glass mass in the feeder depends on the assortment (1,250-1,120) °C. Further, the glass mass is supplied to the glass forming machine using the Emhart servo feeder. The servo feeder is designed for registration and delivery of glass drops with a given temperature, mass, configuration and speed at a certain moment. Productivity, drop/min, (depending on the assortment) - up to 210. For forming glass containers, three eight-section IS-8 Emhart DG 5 1/2” machines are used, working on the principle of Blow&Blow and Press&Blow.
Each section works conditionally independently of each other and represents independent sectional machines. The drop temperature (depending on the assortment) (1,120 ± 30) °C. After forming, the glass container enters the machine conveyor. Further, the hardening operation takes place at the hot end by spraying tin monobutyltintrichloride vapors, which increases mechanical strength and resistance to damage. (Application of the coating at the request of the consumer.) Glass containers are supplied by means of a conveyor system to the Antonini annealing furnace, which has a capacity of up to 110 tons/day. Annealing is a controlled heating and cooling process designed to relieve internal stresses that occur in products during forming. The annealing temperature (depending on the assortment) is (550-600) °C. After annealing, the glass container is hardened at the cold end, Polyglass and CCP compositions are used as a hardening coating. The device is a system of automatic solutions spraying. The products' temperature during coating is (100 ± 30) °C. Then the glass container passes through the conveyor system, where its inspection control takes place (multi-row table, single-row conveyor, M-machine - section control, visual control on the screen. Products that have not passed inspection control and rejected are removed from the conveyor. After that, the glass container is sent to the packaging. Packaging of products takes place in pallets. Glass containers from the conveyors are supplied to the storage table, from where the stacker of the products is transferred to a wooden pallet, where each row is covered with corrugated cardboard or plastic gasket. After the required number of rows has been collected (according to the packaging cards), the pallet is sent to the shrink wrap of the pallet to the shrink machine. The number of products in the pallet is specified in the packaging cards. Packaged products are sent to the finished product warehouse for storage and shipment to consumers.